110V 304 stainless steel centrifugal pump

110V 304 stainless steel centrifugal

pump rotor pump 10t/h

   Stainless steel centrifugal pump is specificalized for all the products which are related to food, such as dairy products, beverages, food, cosmetics, food additives, fine chemicals. The centrifugal pump applies centrifugal force to produce speed, using a rotating impeller to increase the speed and push the fluid through the outlet valve.

  This Centrifugal Pump uses new design machine seal which will not contact the materials. Adopts high efficient and powerful motor, 304 Stainless Steel. Heavy duty of 10 Tons / hour.

Warning: 

1. Do not switch on the pump when it is empty. It will be easily damaged if the pump is operating with no liquid for a little while. Please be sure that there is enough liquid in the pump before you switch on!

2. Do not use this pump with liquid of strong acid and alkali.

3. Do not use this pump with high proof spirits or alcohol.

4.The installation foundation of the pump shall generally be a flat ground with sufficient strength, which shall be installed at the lowest position of the equipment as far as possible, that is, the position with the maximum lift height.

5.Do not idle the machine to prevent burning the motor.

6.Please do not let the machine run at full load for a long time, otherwise the motor overheating protection will cause tripping or stop working.

7.If the machine needs to work for a long time, please pay attention to the heat dissipation of the motor. The maximum number of hours the machine can work depends on the temperature of the environment. If the customer wants good heat dissipation, they can turn on the air conditioning to maintain a relatively cool temperature. Otherwise, they need to work for 4 hours to rest for a while until the heat dissipation is good before continuing to work, and so on.

1. It can transport viscous materials (such as honey, syrup, yoghurt, ketchup, etc.)
2. It can transport granular materials (such as meat jam, jam, batter, etc.)
3. It has self-priming capacity, and the self-priming capacity reaches 5 meters. It can directly absorb materials from above
4. The wall thickness of flexible rotor pump FRXB is 5mm
5. The inner surface is mirror, and the impeller is not mirror
6. Bearing temperature: 100 ℃

You can make order with no worry.
Any concerns just feel free to let us know, we'll reply in 24 hours in normal condition.
Handling Time: Shipping is usually made in 1-3 business days after payments cleared. Orders are processed from Monday-Friday; Not on the weekends & public holidays.
Warranty: 6 months' warranty for the machines, not for the consumables.
We stand behind our products all the item, so even if your warranty period has expired, you can still seek for service or technical support from us with low cost.