110V Paste Liquid Heating Stirring Filling Machine

110V Paste Liquid Heating

Stirring Filling Machine

   The semi-automatic piston filling machine produced by our company has the advantages of simple and reasonable structure, high precision, convenient cleaning and simple operation. The contact area with the material is made of 304 stainless steel, in line with GMP requirements. The sealing parts are made of PTFE and silica gel. They have the advantages of corrosion resistance, aging resistance, high temperature resistance, good sealing and so on. They are ideal filling equipment for food, pharmaceutical, chemical, daily chemical, petroleum, pesticide and other industries.

  This machine has two methods, foot switch filling and continuous automatic filling; the two filling methods can be switched arbitrarily. It is recommended to use the foot switch for filling at the beginning.

(Note2: If you are not sure whether the material can be filled with this machine, please consult before placing an order)

2.Stainless steel body

3.Small cylinder

4.Water outlet

5.Emergency stop switch

6.Discharge assembly

7.Heating rod

8.Heating controller

9.Mixing motor

10.Heating and stirring double layer hopper

11.Water injection port (inlet for adding hot oil or water)

12.Stainless steel hopper

13.Filling speed adjustment knob

14.cylinder

15.Magnetic switch

16.Quantitative hand wheel

Adjust the rocker

filling precision

Hand handle, you can adjust the amount of filling, easy to operate.

Emergency stop switch

Emergency stop button can stop machine action immediately.

Discharge assembly, drip proof design

Filling nozzle, made of stainless steel, accurate filling without plugging, removable easy to clean and maintain.

Adjust the speed of the cylinder moving piston rod:
The end near the moving rod (away from the handwheel) is the outlet control valve (Adjust the speed of the cylinder moving rod to push out the material);
The end away from the moving rod (near the handwheel) is the intake control valve (Adjust the speed of cylinder moving rod recovery).

Clockwise downward, the discharge speed becomes slower;
Counterclockwise upward, the discharge speed becomes faster.

1.. This type of hopper is a heating and insulation hopper. If customers use water as a medium for heating and insulation, there will be a certain amount of heat loss through heating with a heating rod and external environmental factors, and the maximum temperature can reach around 90 degrees Celsius;
2.If customers want to reach a higher temperature, they can apply a medium with a higher boiling point for heating and insulation (such as heat transfer oil). Through heating with a heating rod and external environmental factors, there will be a certain amount of heat loss, with a maximum temperature of around 118 degrees Celsius;
3.Customers can also heat the material externally and pour it into the hopper, which provides excellent insulation to ensure that the material does not solidify during the filling process;

This series of filling machine is only suitable for filling liquid, low concentration paste .
To ensure safe production, please read the following precautions carefully:
1. Use a power supply and air source that conforms to the requirements of this machine . The stability of the air source must be maintained under continuous working conditions.
2. Before disassembling, washing or repairing this machine, please be sure to turn off the air source and power supply first.
3. The rear half of the machine (near the control buttons) and the lower part of the machine frame are equipped with electrical control components. Under no circumstances should the body be washed directly with water, otherwise there will be danger of electric shock and damage to the electrical control components.
4. After the power switch is turned off, there is still voltage in some circuits in the electrical control of this machine. When repairing the control circuit, please be sure to unplug the power cord.
5. Do not keep your eyes close to the filling head during work, pay attention to personal safety.
6. Do not put your hand on the central axis of the cylinder during the work process, pay attention to pinching your hands.
7. Before using materials for filling, it is best to clean the machine with detergent first, and then clean it with clean water, so as to avoid oil stains or foreign materials and materials mixing, which will lead to waste of materials and damage to the machine.
　

Affected by the following factors at work:
1. The factors that affect the filling accuracy are: the stability of the compressed air, the uniformity of the material, the filling speed, etc.
2. The factors that affect the filling speed are: the viscosity of the material, the stroke of the cylinder, the size of the cylinder, the size of the discharge nozzle, the proficiency of the operator, etc.

You can make order with no worry.
Any concerns just feel free to let us know, we'll reply in 24 hours in normal condition.
Handling Time: Shipping is usually made in 1-3 business days after payments cleared. Orders are processed from Monday-Friday; Not on the weekends & public holidays.
Warranty: 6 months' warranty for the machines, not for the consumables.
We stand behind our products all the item, so even if your warranty period has expired, you can still seek for service or technical support from us with low cost.